Jetway HA03 Ultra (AMD 790X)
Jetway HA03 Ultra: Layout and Features
There is nothing to complain about the PCB design, since the first PCI-Express video card does not block the DIMM latches.
Besides, we note that the main 24-pin power connector is installed on the board's bottom edge, with the additional 8-pin connector (the backward compatibility to the PSU with a 4-pin cable has been preserved) - on the right-hand edge:
Near the north bridge, there is a 4-pin CPUFAN connector to plug in a CPU cooler.
Besides it, there are three more 3-pin connectors: CHAFAN - near the Molex connector, SYSFAN1 and SYSFAN2 - on the bottom edge of the board.
On the North Bridge, there is quite an impressive radiator.
Then, there are four DIMM slots, and the maximum memory capacity makes 8 GB. We also note that DDR2-1066 is supported by AM2+ CPU only.
To enable the dual-channel mode, the memory modules should be inserted into the slots of the same color. Once power is applied to the board, a Hummer logo lights up in the bottom left corner.
As regards the expansion options, the board uses two PCI Express x16 slots as well as two PCI Express x1 and two PCI slots.
 |
Top Stories: |
 |
 |
|
MoBo:
| |
|
|
VGA Card:
|
|
|
|
CPU & Memory:
|
|
