InnoVision's 9 video cards - a complete assortment of value-sector solutions for AGP and PCI-E
Inno3D GeForce 6200 and 6600 PCI-E based on NV43
Package bundle of Inno3D GeForce 6200:
- Video card Inno3D GeForce 6200;
- DVI/ D-Sub 15-pin adapter;
- S-Video/RCA adapter;
- Drivers and utilities CD;
- User's manual;
- ÑD with 3DMark05.
Package bundle of Inno3D GeForce 6600:
- Video card Inno3D GeForce 6600;
- DVI/ D-Sub 15-pin adapter;
- S-Video/RCA adapter;
- Drivers and utilities CD;
- User's manual;
- ÑD with 3DMark05.
Why did we decide to merge descriptions of these two cards? All is simple - in fact, they differ in only the number of pixel pipelines, which has been cut down to 4 in GeForce 6200. In what follows, in the part to do with the tests, we'll try to fix that annoying thing.
Of course, now that all NV43-based 6200 have been officially replaced with GeForce 6600LE, it would not be quite logical to review GeForce 6200. However, since GeForce 6200 can't disappear in a day will still be embellishing the retail shelves for some time, we can afford to explore this board also now.
Besides, as we found out, GeForce 6600LE makes little difference from GeForce 6200, the performance data can be easily interpreted.
Well, let's look at the cards. I suggest that you should play the game called "find 10 differences".
Inno3D GeForce 6200 PCI-E
Inno3D GeForce 6600 PCI-E
In fact, it's useless to play the game because the only difference is hidden under the cooling system in the form of an aluminum radiator covering the GPU, and it is even not visible to the naked eye.
The chip in both the cards runs at 300 MHz. There are eight pixel pipelines in GeForce 6600 and four in GeForce 6200.
The boards are equipped with 128Mb of GDDR video memory, with a 128-bit data transmission bus, in the form of eight Samsung TSOP chips positioned on the front side of the board. The access time is 4 ns, which is equivalent to 250MHz (500 MHz DDR) and which is the standard frequency for these two cards. As the thermal interface, the "thermal chewing gum" is used.
The boards do not offer a SLI connector, but the SLI mode can be activated with ForceWare drivers of version 77.72 and higher. The set of outputs is also standard - analogous, digital, and TV-OUT.
 |
Top Stories: |
 |
 |
|
MoBo:
| |
|
|
VGA Card:
|
|
|
|
CPU & Memory:
|
|
